How do frameless interior doors work?

A Frameless Wooden Interior Door is a door with a concealed door jamb, and often with the decorative casing and door trim removed. All you see is the door slab, typically sitting flush with one side of the wall (this is also known as "filo muro").

First, the treatment of the door is a key step. Due to the special nature of the Frameless Wooden Interior Door, after the door hole is looking for flat, if the wall is unstable, it usually adds a layer of woodworking board to the door hole to increase the stability, and then the plaster plate is painted with paint.

Next is the installation of the door frame. The inner side of the door is nailed to a door frame. This door frame needs to be colored. Usually, high-quality latex paint is used directly.

The installation of the door fan is to install the white door panel purchased by the local market to the door frame. It should be noted that this step should be explained to the merchant as long as the door panel, do not want the door line, and then install the door panel to the already-made door frame.

During the installation process, you also need to pay attention to some details, such as different materials of gypsum boards in the original wall and door frames may cause the latex paint to crack in the continuous closing of the door and the continuous changes in temperature. In this case, you may need to take some measures to deal with this problem, such as switching to the entire wall wood or leaving process seams.

Finally, you need to adjust and fix after completing the installation. Make sure that the door fan can smoothly slide into the gap of the door frame and form a good seal with the door frame. Adjust the position of the door fan to ensure that the gap between the door fan and the door frame is uniform and meet the requirements, and then use the screw to fix the door fan on the door frame by using the screws on the door of the door fan.

Through the above steps, the installation and adjustment of the Frameless Wooden Interior Door is basically completed. This installation method is not only beautiful and generous, but also has good lighting and decorative performance, adding modernity and permeability to indoor space‌‌.

‌